Ortho grab and go sprayer manual

Release the spray by pressing the lever on the wand. Walk at the same pace you will be walking when applying the chemical. Rotate the Ortho lawn sprayer's nozzle tip to adjust the spray pattern until it feels comfortable to you and sprays in a consistent pattern. Pour out the water from the Ortho sprayer on the lawn and fill with the chemical you choose to use. Adjust the Ortho lawn sprayer nozzle as necessary when you are applying the chemical if it does not spray evenly or at a consistent, easily controlled pace.

The siphoning action of the hose does the mixing. Soak the top and siphoning tube in a bucket of fresh water for 10 minutes to soften the blockage. Head to the furthest point and work backwards. Squeeze the trigger to begin spraying. Where to use Always read and follow liquid product label instructions. Where not to use Always read and follow liquid product label instructions. When to apply Always read and follow liquid product label instructions. How often to apply Always read and follow liquid product label instructions.

Coverage area Always read and follow liquid product label instructions. Category Garden. Cautions Before using any product, read the product label to ensure it is compatible with this sprayer. Using bleach and soap will damage the sprayer. This prevents any product from flowing back into the water system.

Disposal Methods After use, clean the jar and sprayer, and store until needed. Product Label This is not the product label. Always read and follow the product label before use. View Label. Check to see that the correct hose end connector is attached. The O ring also may need lubrication or simply be worn out, so either oil it or find a replacement part.

When an internal O ring needs attention, dismantle the spray gun to check it. First, unscrew its metal cap located in the back with a pair of pliers. Take out the spring, and push on the plunger from the trigger side. Then grip the trigger with your pliers to remove it. Spread the oil inside the cavity and around the O rings. Put everything back together once it's clean and dry. Try the sprayer to see whether it sprays properly.

You can lubricate the spray gun even if it's working to help it operate more smoothly. Writers from Fix. This filter is supposed to prevent clogs, but when dirty, the pressure can decrease or stop altogether.